XPLOR PRO COMPONENTS
XPLOR PRO
FORKS
The XPLOR PRO fork applies WP’s Cone Valve technology to Enduro and Dual-Sport models. Simply, the Cone Valve is a shimless mid-valve. According to WP, “this patented, super precise valving system offers virtually unlimited damping performance superior to the conventional compromise between sufficient comfort and bottoming reserves. The Cone Valve technology, made from the highest quality materials, eliminates this compromise and provides outstanding damping in any situation. The unlimited opening up of the WP Cone Valve reduces harshness to provide additional comfort, also with a harder set-up.”
variants
XPLOR PRO 7548 - Closed Cartridge with Coil Springs.
XPLOR PRO 7448 - Closed Cartridge with Air Spring.
fitment
KTM, Husqvarna, and GasGas Motorcycles Enduro / Dual-Sport models.
BASELINE PRICING
$3,499 USD
Revalve: $295 USD (labor & tuning parts)
Dyno Verification: $180 USD
Pro Components for most KTM / Husqvarna / GasGas models are IN STOCK
XPLOR PRO PDS
SUPERTRAX SHOCK
The SUPERTRAX technology is now available for bikes with PDS rear suspension (2017 & newer EXC, EXC-F, XC-W, & XCF-W models). The innovative SUPERTRAX mechanism reduces rebound damping when the rear wheel is off the ground, helping the tire get back to traction as quickly as possible.
features / benefits
Externally adjustable Supertrax mechanism - infinitely easier to use and understand than previous generation.
High-end construction - dramatic reduction in friction compared to OEM components.
Nitrogen bladder instead of an Internal Floating Piston (IFP) — this has advantages (lower friction) and disadvantages (requires more frequent service) compared to WP’s traditional piston separator setup.
Separate high-speed and low-speed compression adjusters - instead of a concentric dual compression control (DCC) found on OEM shocks.
Rebound separator valve, which isolates compression and rebound adjustments, and increases low speed compression damping at the mid-valve (which can aid in pressure balance)
Download pdf brochure here.
fitment
2017 and newer KTM XC-W / XCF-W / EXC / EXC-F / SIX DAYS EDITION / ERZBERG RODEO EDITION
BASELINE PRICING
$2,249 USD
Revalve: $295 USD (labor & tuning parts)
Dyno Verification: $180 USD
Pro Components for most KTM / Husqvarna / GasGas models are IN STOCK
Technical Overview
what are pro components?
WP's Pro Components line is aftermarket suspension designed for riders who want the highest quality components and are willing to pay a premium.
Pro Components are manufactured to tight tolerances using high quality materials, fine surface finishes, and low-friction coatings. These improvements reduce friction compared to OEM suspension components, and is perhaps their most significant advantage. In fact, to achieve a similar feeling of stiffness to OEM suspension, all Pro Components required much stiffer damping. The additional “stiffness” in the OEM components is due to the additional friction. Friction is perhaps the one thing in suspension where no compromise is involved: less friction is always better. When setup appropriately for the rider, Pro Components can deliver high confidence at high speeds.
tuning
Like any suspension hardware, Pro Components depend entirely on setup. The best parts in the world can’t make a poor or mismatched setting perform well. Think of it as hardware and software, where suspension components are the hardware, and the valving, springs, and air gap are the software. One can’t work without the other. Kreft Moto is experienced with WP’s range of recommended setups, as well as customized versions based on our own testing. Our experience enables us to make the most of your Pro Components purchase.
dyno verification
Kreft Moto puts every WP Pro Component through our dyno verification process. The dyno allows us to compare your specific components to a known baseline, and adjust your setting as needed to match a target outcome precisely. This additional quality control step ensures we deliver the absolute best possible Pro Component suspension.